LinuxCNC Archives -

CNC Machine Calibration: Complete Guide to Squaring, Tramming and Backlash Compensation

Post author:Viren
Post published:August 5, 2026
Post category:CNC & Machining

Key Takeaway: CNC machine calibration — squaring the frame, tramming the spindle, and compensating backlash — transforms a hobby machine that makes scrap into one that holds tight tolerances, and…

CNC controller software comparison chart showing GRBL, Mach3/Mach4, and LinuxCNC features

CNC Control Software Comparison 2026: GRBL vs Mach3/Mach4 vs LinuxCNC — Which Is Right for Your Machine?

Post author:Priya Sharma
Post published:July 24, 2026
Post category:CNC & Machining
Post comments:0 Comments

Key Takeaway: Choosing the right CNC control software — whether open-source GRBL, mid-range Mach3/Mach4, or industrial-grade LinuxCNC — directly affects your machine’s speed, precision, axis count, and overall workflow. This…

LinuxCNC on Raspberry Pi 4B — Double Step Mode: Hardware stack, step rate comparison, and INI configuration

LinuxCNC Raspberry Pi 4B Double Step Implementation Guide + HAL GPIO Download

Post author:Priya Sharma
Post published:December 27, 2021
Post category:CNC & Machining
Post comments:0 Comments

Complete guide to implementing LinuxCNC on Raspberry Pi 4B with double step mode. Custom HAL GPIO component download, OS setup, INI config, and performance tuning for up to 80kHz step rates on DIY CNC machines.

SolidWorks CAM Post Processor for LinuxCNC Lathe – Complete Guide + Free Download

Post author:Priya Sharma
Post published:June 23, 2021
Post category:CAD/CAM
Post comments:0 Comments

Generate SolidWorks CAM post processor for LinuxCNC lathe operations. Step-by-step guide to export G-code from SolidWorks CAM for LinuxCNC machine control.